[SI-LIST] high-freq application socket selection

From: "Trent" <trent@xxxxxxxxxxxxxx>
To: <si-list@xxxxxxxxxxxxx>
Date: Fri, 14 May 2004 11:38:34 +0800

Hi All,
I am looking for an ATE testing socket for high-frequency application
(ex. 1.6G data rate).

There are many electrical parameters in socket datasheet likes 

-Resistance

-capacitance

-inductance

-insertion loss (S21)

-return loss (S11)

-crosstalk

 

How do I know the criterions of these electrical parameters that meet my
application frequency?

That is, how could I develop a guideline to tell the criterion to choose
the right socket that meets my high-freq. application?

 

Thanks in advance

best regards,

Trent

 



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] high-freq application socket selection

Other related posts: