[SI-LIST] flat cable model
- From: "mohaghtalab" <mohaghtalab@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 10 Dec 2007 15:56:27 -0000
Hi to all
I want to simulate an Xnet between two boards
it contains two connector and flat cable between them
my problem is to assigning correct transmission line
to my flat cable to analyze signal integrity problem of my XNET
Thanx for your help
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] flat cable model
