Hi experts,
I found that using Matlab RF toolbox cascadesparams, the channel sparam
obtained is slightly different from that obtained with a commercial channel
simulator. Also, different freq points give different sparams. Any comments
on extracting the channel sparam using Matlab?
--
Best Regards,
Tramp
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu