Hi steve,
We use micro-probe and SOLT calibration to probe tip.Do I need de-embedding
still ?
Thx .
steve weir <weirsi@xxxxxxxxxx>äº2015å¹´4æ15æ¥ææä¸åéï¼
This sounds like a de-embedding problem. Problems like this are oftenand
seen in particular with low loss material measurements.
Steve
On 4/14/2015 6:41 PM, é»æ¶ wrote:
Hi experts,
Sorry for messy code of this question previously .
We characterize insertion loss by xx.xx dB/inch usually.But after we
measured total loss of trace,the loss per unit length calculated by
different length are difference .For example ,one 4inchs trace measured
losscalculated loss A dB/inch .and one 8inchs teace measured and calculatd
B dB/inch while other parameters of design are same.The A is a little
greater than B alwalys.
My question is:why are there difference ?from measurements?design ?or any
others ?
T hanks
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
--
Steve Weir
IPBLOX, LLC
1580 Grand Point Way
MS 34689
Reno, NV 89523-9998
www.ipblox.com
(775) 299-4236 Business
(866) 675-4630 Toll-free
(707) 780-1951 Fax
All contents Copyright (c)2015 IPBLOX, LLC. All Rights Reserved.
This e-mail may contain confidential material.
If you are not the intended recipient, please destroy all records
and notify the sender.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu