[SI-LIST] Re: WHich dielectric to use

  • From: Tesla <emcesd@xxxxxxx>
  • To: avtaarenator@xxxxxxxxx
  • Date: Mon, 3 Sep 2012 10:13:24 +0800 (CST)

Hi,Avtaar
it depends on how long your trace.
For serdes, the FR4 always is not a problem. In the stage of chip design, it 
has considered the effect of Loss using circuit method to overcome it.
i think you should get a idea about what your chip is used for, the using AMI 
model get a rough estimation.
 
Thanks.
 
Tesla.




At 2012-09-03 09:33:41,"Avtaar Singh" <avtaarenator@xxxxxxxxx> wrote:
>I have to design a telecom system to run at 20 Gbps.
>I tried the following:
>
>   1. FR4 on backplane and daughtercards - did not work
>   2. Nelco4K-13EP on backplane and daughtercards - did not work
>
>I was just wondering which of these next steps could give me
>the desirable results? Is this sequence mentioned below close to what I
>should be trying for iterative link level simulations
>
>   1. Megtron 6 on backplane & Nelco4K-13EP on daughtercards?
>   2. Megtron 6 on backplane & Nelco4K-13EPSI on daughtercards?
>   3. Megtron 4  on backplane & Nelco4K-13EP on daughtercards?
>   4. Megtron 4  on backplane & Nelco4K-13EPSI on daughtercards?
>   5. Megtron 6 on backplane as well as daughtercards?
>   6. Megtron 4 on backplane as well as daughetrcards?
>
>
>-------
>
>Regards,
>Avtaar Singh
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
>List forum  is accessible at:
>               http://tech.groups.yahoo.com/group/si-list
>
>List archives are viewable at:     
>               //www.freelists.org/archives/si-list
> 
>Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>  
>


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: