[SI-LIST] Re: Using general purpose computer tools to solve SI problems
- From: Dirk Eyfrig <Dirk.Eyfrig@xxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 28 Sep 2004 16:39:07 +0200
Hello All,
I'm using Excel in conjunction with HyperLynx in two ways:
1. To assign models to components. (Generate Syntax of the PIN_MODELS
Section of the .bud file, then copy&paste) This method could easiely be
extended to other sections of the .bud file. The advantage of doing it
within HyperLynx is that one can handle mass changes (ex. assigning new
Models to a large FPGA) much faster.
2. To evaluate the data of the .rpt file (Which imo has a very complex
syntax)
Best Regards
Dirk Eyfrig
Head of EMC Services & PCB Design
Phone: +49 7681 202-3145
Mailto:Dirk.Eyfrig@xxxxxxx
SICK AG
Sebastian-Kneipp-Str.1
D-79183 Waldkirch
http://www.sick.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
