There was a TCL script( runeye.tcl ) to generate eye diagram from XTK. You should ask your Innoveda AE. -Joel. At 09:38 AM 10/31/01 -0500, Aaron Frank wrote: > >Has anybody found a way to use XTK to generate eye diagrams? >thnx >AAron >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ Joel Amzallag FPGA Synthesis Specialist Synopsys Inc. email : amzallag@xxxxxxxxxxxx 700 East Middlefield Rd. phone : (650) 584-4145 Mountain View, CA 94043 fax : (650) 584-5359 ------------------------------------------------------------------ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu