[SI-LIST] Termination resistors
- From: david stern <dan1_st@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Sat, 28 Feb 2009 10:40:11 -0800 (PST)
Hello
I need help in the following
I need to interface a LVPECT device to virtex 5 MGT ROCKET IO which is CML
input.
How to do it which termination resistors to use?
I asked this question in the XILINX forum but didn't get an answer.
Thank you
David
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
