[SI-LIST] Re: Tell me about USB ?
- From: Matthias Weingart <si-list@xxxxxxxxxxxxxxxx>
- To: Steve Rogers <SRogers@xxxxxxxxxxxxx>
- Date: Thu, 18 Dec 2003 09:49:58 +0100
Download the spec from www.usb.org. You find a answer to some of your
questions in the usb2.0 pdf file.
M.
On Thu, Dec 18, 2003 at 08:44:17AM -0000, Steve Rogers wrote:
> I need to pass USB signals over a cable. I am not familiar with USB. =
> Could anyone let me know the best way to do this? Useful info would be:-
>
> 1. Type of cables to use (I am concerned about the system working but =
> more so Radiated Emissions)
> 2. Any limits on cable run lengths
> 3. Termination impedances (If needed)
> 4. Filtering recomendations=20
> 5 Any other useful info
>
> Thanks in advance
>
> Steve Rogers B.Eng (Hons) C.Eng IEE
> RF Design Engineer
>
> Micromill Electronics Limited
> Leydene House
> Waterberry Drive=20
> Waterlooville Hampshire
> PO7 7XX
>
> Tel: +44 (0) 23 9236 6600
> Fax: +44 (0) 23 9236 6673
>
> Registered No. 1456922 (England). =20
> Registered Office Brook Road
> Wimborne, Dorset BH21 2BJ
>
> ***********************************************************************
>
> "This email and any attached files are confidential and may be legally =
> privileged.If you are not the addressee, any disclosure, =
> reproduction,copying, distribution,, or other dissemination or use of =
> this communication is strictly prohibited. If you have received this =
> transmission in error please notify the sender immediately and then =
> delete this email.
>
> It is the policy of Micromill Electronics Limited that no legally =
> binding statements, representations or commitments (collectively =
> 'statements') may be made by email. Any such statements must be =
> confirmed either by facsimilie or by post before they will have legal =
> effect. The sender of this email is not authorised to commit the company =
> in any way and the addressee is hereby formally notified of that fact."
>
> ***********************************************************************
>
>
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
Matthias
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
