[SI-LIST] Surface mount vs. through hole at 1.5 to 3 Gbps
- From: Mike Haff <mhaff@xxxxxxx>
- To: 'Signal Integrity List' <si-list@xxxxxxxxxxxxx>
- Date: Tue, 12 Nov 2002 17:39:12 -0800
Hi all,
Can anyone offer input or literature recommendations for SI issues related
to I/O connector designs. I am specifically looking for SI issues related
to surface mount vs. through hole designs in I/O connectors to support data
rates of 1.5 Gbps with headroom for 3.0 Gbps.
Thanks,
Mike Haff
Enhance, Inc.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
