Hello Satish,
I'm not sure about the questions, but I think the answer is:
Please check your controllers ability on trainings and available
registers to modify timings and voltages to optimize the interface.
Hermann
EKH - EyeKnowHow
Signal Quality - Made in Bavaria
Hermann Ruckerbauer
www.EyeKnowHow.de
Hermann.Ruckerbauer@xxxxxxxxxxxxx
Itzlinger Strasse 21a
94469 Deggendorf
Tel.: +49 (0)991 / 29 69 29 05
Mobile: +49 (0)176 / 787 787 77
Fax: +49 (0)3212 / 121 9008
Am 31.10.2017 um 04:28 schrieb Satish Sr:
Hi Experts
What is software tuning in DDR & How it is done , any reference notes. Pl.
help out.
Best Regards
Satish
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu