Hi, While performing an EMC simulation on a starburst topology and comparing the results for various transmission line lengths (drive - common point - receiver), the results can be tabulated for Max MHz and dbuV/M. I wanted to know if there is any significance of frequencies at which the design fails the max radiation limit. =0D Regards, Arjun Bingipur ***************************************************************************= ************* Note: If the reader of this message is not the intended recipient, or an= employee or agent responsible for delivering this message to the intended= recipient, you are hereby notified that any dissemination, distribution or= copying of this communication is strictly prohibited. If you have received= this communication in error, please notify us immediately by replying to= the message and deleting it from your computer. Thank you.=0D ***************************************************************************= ************* ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu