Hi siva, there is a PCB check-list for SI on Xilinx site at following web-address: www.xilinx.com/xlnx/xil_prodcat_product.jsp?title=si_pcbcheck . I hope it will come in useful, marco Siva kumar wrote: > Hi all, > Is there any general check-list for SI > analysis (that has to be taken care while doing > pre-roue, post route and si-validation) the available > on the net or in this group? > > thanks in advance, > siva > > __________________________________________________ > Do You Yahoo!? > Find a job, post your resume. > http://careers.yahoo.com > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu