The voltage drops due to driver impedance. Steve On 9/16/2012 9:46 PM, Shilpa Patil wrote: > Hi SI Experts, > I have been carrying out the analysis for DDR3 memory. My query is that at > the driver end I can see a signal with a dip and shorter peak-peak the > signal is not a pulse even though I have given a pulse, but at the receiver > the signal is good. So why is the signal at the driver so not a proper pulse? > > Regards, > Shilpa P > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax All contents Copyright (c)2012 IPBLOX, LLC. All Rights Reserved. This e-mail may contain confidential material. If you are not the intended recipient, please destroy all records and notify the sender. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu