[SI-LIST] SPLIT POWER PLANE
- From: "sreekanth namboothiri" <nsreekanth@xxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 06 Jun 2006 04:07:07 -0500
Hello Gurus,
I have a power splitt in my design which is unavoidable,and due to some
routing constraints some signals are crossing over the split in another
layer.
Is there any solution for such sistuations?
I rembr , earlier i had almost same issues with GND splits and we managed
it with tying up both the GNDs with 0 ohm resistors.
What can be done ,in the case of power split?
Sreekanth
--
___________________________________________________
Play 100s of games for FREE! http://games.mail.com/
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
