Hi Experts,
We are simulating/analyzing the 10Gbase Tx/Rx data lines With SFP+
module(10Gbase) for the 5 Inches trace length. Observing BER failures.
Is there any De-emphasis value need to be set, We are using only IBIS models
for simulation instead of IBIS-AMI Models.
We have not simulated SFP+ interface before, If you experienced with this
interface please guide us and also we are not having exact models for the
simulation, Please give your guidelines based on Transmission loss and
de-emphasis settings.
Thanks & Regards
Arunkumar K
L&T Technology Services Ltd
www.LntTechservices.com<http://www.lnttechservices.com/>
This Email may contain confidential or privileged information for the intended
recipient (s). If you are not the intended recipient, please do not use or
disseminate the information, notify the sender and delete it from your system.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu