[SI-LIST] S parameters for complex designs
- From: "HOYSALA " <hoysala2003@xxxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 21 May 2003 02:30:43 +0530
Hi all
I have a quection on Scattering Parameters
When we go for Complex design at high freq ( with complex transfer function)
, does going for S parameters
will be Helpful?
When I have gone through a paper (by DR Howard Johnson, news letter), I read
these S -paramaters are used for a Linear , Time Invariant Two Port Networks .
and Also I read these are for modelling the connectors and cables .
" Is this two port network in enough to model all the corresponding Poles and
Zeros of a
system at High Frequency ??"
Regards
Hoysala
Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com
Buy The Best In BOOKS at http://www.bestsellers.indiatimes.com
Bid for Air Tickets @ Re.1 on Air Sahara Flights. Just log on to
http://airsahara.indiatimes.com and Bid Now !
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] S parameters for complex designs
