should depends on noise margin.
please check this
http://www.sigcon.com/Pubs/news/5_11.htm
On Sat, Jun 27, 2015 at 4:40 PM, harini <harini@xxxxxxxxxxxxxxxxxxxxxxx>
wrote:
Hi Experts,
How to determine the acceptable crosstalk. I have a 6-layer PCB with
stripline and dual-stripline configuration having DDR3, RGMII and GPMC
asynchronous signals. When I checked the crosstalk in EDA tool I get in the
range of 550mV.
How to determine the minimum acceptable crosstalk range that would not
cause
error and can be ignored.
Thanks & Regards,
Harini M.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu