[SI-LIST] RF Shiled
- From: sunil bharadwaz <sunil_bharadwaz@xxxxxxxxx>
- To: SI LIST <si-list@xxxxxxxxxxxxx>
- Date: Tue, 24 Mar 2009 10:38:23 -0700 (PDT)
Hi ,
We are designing a Power Amplifier board @ 5.0 Ghz.We want design a shield
for that.
The plan is to space the holes on the shield with spacing less than lambda/20.
How do we ensure that the shield it selves does not become a resonant cavity
at that frequency ?What is the best material used for shield (Aluminum ...etc) ?
Pls point me to any further relevant info in this regards.
regards
Bharadwaz.Sunil
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
