If you are asking what number to give your simulator as a report threshold, it should be the value that you have budgeted into your design. If you are asking how much crosstalk to budget, that is an infamous SI-LIST: "It depends ..." question. Reducing crosstalk imposes other design trade-offs. The only absolute answer is the trivial case that cross-talk cannot be so severe that with no other impairments your signal quality is inadequate. Steve. On 5/13/2013 2:50 AM, Balajy Kumar -ERS, HCL Tech wrote: > Hi > I am doing crosstalk analysis for my board. Could you please explain how to > set the max allowable crosstalk voltage limit? > > Thanks > Balajy > > From: Balajy Kumar -ERS, HCL Tech > Sent: Monday, April 22, 2013 7:48 PM > To: 'si-list@xxxxxxxxxxxxx' > Subject: REG:Splitting LVDS signals into T topology > > Hi > > I split the differential LVDS pair signals into a T-topology for my project > and the simulated it. But I observed more ringing in the signals. Can please > clarify how it will affect the functionality of the system? > > Thanks > Balajy > > > > > > ::DISCLAIMER:: > ---------------------------------------------------------------------------------------------------------------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. > E-mail transmission is not guaranteed to be secure or error-free as > information could be intercepted, corrupted, > lost, destroyed, arrive late or incomplete, or may contain viruses in > transmission. The e mail and its contents > (with or without referred errors) shall therefore not attach any liability on > the originator or HCL or its affiliates. > Views or opinions, if any, presented in this email are solely those of the > author and may not necessarily reflect the > views or opinions of HCL or its affiliates. Any form of reproduction, > dissemination, copying, disclosure, modification, > distribution and / or publication of this message without the prior written > consent of authorized representative of > HCL is strictly prohibited. If you have received this email in error please > delete it and notify the sender immediately. > Before opening any email and/or attachments, please check them for viruses > and other defects. > > ---------------------------------------------------------------------------------------------------------------------------------------------------- > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 1580 Grand Point Way MS 34689 Reno, NV 89523-9998 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax All contents Copyright (c)2013 IPBLOX, LLC. All Rights Reserved. This e-mail may contain confidential material. If you are not the intended recipient, please destroy all records and notify the sender. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu