Hi Friends, I have designed a board with MCF5212 Processor and it was interfaced to a Pericom (saronix-ecera) NKS5 series quartz crystal. The crystals operating temperature was -40Deg c to 85Deg c. Earlier i tested this board and everything was fine but now because the PLL was not locking and processor was working. So when i observed i noticed that at ambient temperature the crystal clock output was 2V p-p but with decrease in temperature the clock output was decreasing below 0.8V at -40 Deg c. Can you just give me an idea about this problem and what might be the problem in this scenario? Thanks & Regards Sree ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu