[SI-LIST] Re: Power consumption of an amplifier

  • From: "Wolfgang Maichen" <w.maichen@xxxxxxx>
  • To: raghav.usa@xxxxxxxxx
  • Date: Tue, 31 Oct 2017 08:13:16 +0100

Hello Raghav,

depending on the amplifier design just changing the gain setting may indeed
not directly affect the power consumption by a measurable amount. What may
change is the power consumption when actually driving a load attached to
the amplifier output - different output signals (higher/lower amplitude, or
higher/lower pre-emphasis resulting in different amount of peaking) will
result in different amount of power dissipated in the load. This power must
come from somewhere - the amplifier's power supply.

In other words, as long as the amplifier is not driving a load (or only a
high-impedance load like an oscilloscope probe), you may not see any effect
of the gain setting on the power consumption.


Mit freundlichen Grüßen
Kind regards

Wolfgang Maichen
Manager IC Test System
Embedding Industrialization

AT&S Austria Technologie & Systemtechnik Aktiengesellschaft
Fabriksgasse 13, 8700 Leoben
Austria

Phone: +43 3842 200 5465
Mobile: +43 676 8955 6065
Email: w.maichen@xxxxxxx
www.ats.net




From:   Raghav USA <raghav.usa@xxxxxxxxx>
To:     undisclosed-recipients:;
Cc:     si-list@xxxxxxxxxxxxx
Date:   31.10.2017 02:11
Subject:        [SI-LIST] Power consumption of an amplifier
Sent by:        si-list-bounce@xxxxxxxxxxxxx




Hi Folks

I want to test the power consumption of a chip on an EVAL board provided
with equalizer gain settings which can be varied. This chip is basically an
amplifier.

I could drive the power supply as specified  in the data sheet to 3.3V I
have gain settings to talk to the chip. But feeding a higher gain did not
affect the current drawn.  Any suggestions to measure power consumption?
The assumption here is the chip on the EVAL board consumes most of the
power.

Thanks
Raghav

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:
                                 //www.freelists.org/archives/si-list

Old (prior to June 6, 2001) list archives are viewable at:
                                 http://www.qsl.net/wb6tpu






AT&S Austria Technologie & Systemtechnik AG
Legal form | Rechtsform: Aktiengesellschaft
Registered office | Sitz: Fabriksgasse 13, 8700 Leoben, Austria  
Commercial Register Number | Firmenbuchnummer: FN 55638 x, Landesgericht Leoben 

This e-mail and any attachment may contain confidential and/or privileged 
information. If you are not the intended recipient (or have received this 
e-mail in error) please notify the sender immediately and destroy this e-mail. 
Any unauthorised copying, disclosure or distribution of the material in this 
e-mail is strictly forbidden.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: