[SI-LIST] Re: Pin Type Scope ground
- From: "Lee Ritchey" <leeritchey@xxxxxxxxxxxxx>
- To: "Alex Horvath" <alexh1@xxxxxxxxxxxxx>, si-list@xxxxxxxxxxxxx
- Date: Fri, 16 Dec 2005 16:25:32 -0800
We use surface mount loops. I can provide a pdf picture if anyone wants
one. I'd post it with my reply, but I understand attachments don't get
forwarded.
Lee W. Ritchey
Speeding Edge
P. O. Box 2194
Glen Ellen, CA 95442
Phone- 707-568-3983
FAX- 707-568-3504
I just used the energy it took to be angry to write some blues.
Count Basie
> [Original Message]
> From: Alex Horvath <alexh1@xxxxxxxxxxxxx>
> To: <si-list@xxxxxxxxxxxxx>
> Date: 12/16/2005 2:09:13 PM
> Subject: [SI-LIST] Pin Type Scope ground
>
> Hi,
>
> I find it's easier to use a 0.025 square (or similar) type pin for high
speed scope grounds. I've used the loop style where you use a clip adapter
but the clip often slips off and of course it increases the size of your
ground loop. Through hole is not desireable from a layout and manufacturing
standpoint even though it would be used for proto only.
>
> I have heard that there are nail type SMT pins but I have never seen
one. Anyone ever seen something like this or used something similar. I
would think they might be problematic from a automated assy standpoint but
that is not a requirement.
>
> Thanks
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
