Hi all,
I would like to hear from anyone who has managed to get a **clear** pass
for 100Mbps Ethernet when tested to ETSI EN 300113 (V2.1.0 or equivalent) using
UTP cable.
Over multiple products I have always had a hard time meeting it without going
to STP cable and the emissions always seem to be very cable dependant. One
cable can give a completely different spectra than another over an
approximately 36-110MHz range.
PLEASE, and I must insist this, I only want to hear from someone who has
**actually achieved** this and therefore possibly what you used for Phy and
magnetics or some other trick. I am not particularly interested in opinions and
suggestions from people that have only achieved basic CISPR 22 passes as this
standard (with its -57dBm substitution equivalent) seems to be a tough nut to
crack!
Regards,
Bryan Ackerly
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
