[SI-LIST] PCB guides for Ethernet Phy to Connector
- From: "Peterson, James F (EHCOE)" <james.f.peterson@xxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 8 Oct 2008 08:31:31 -0400
Hello,
We are looking for a PCB guideline (including routing & layering
recommendations) for a Ethernet 1000BASE-CX circuit. Specifically from
the PHY device through the passives to the connector.
Thanks for your help.
Jim Peterson
Honeywell
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
