[SI-LIST] Re: Need a tool to calculate trace inductance.

  • From: ttsp@xxxxxxxxxxx
  • To: bradley.t.herrin@xxxxxxxxx, si-list@xxxxxxxxxxxxx
  • Date: Tue, 22 Oct 2002 14:35:42 -0500

http://emcsun.ece.umr.edu/new-induct/
Try this link, it may hep you.

Tim

-----Original Message-----
From: Herrin, Bradley T [mailto:bradley.t.herrin@xxxxxxxxx]
Sent: Tuesday, October 22, 2002 2:09 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Need a tool to calculate trace inductance.



Hi there-  
I could use some help and was referred to this list.  I am trying to
calculate the inductance or a trace on an inner layer of a board with 1 Oz
copper.  The trace is 9 to 10 inches long and is approximately 4 t o4.5
inches wide.  The layer is using 1 Oz copper.  Does anyone have the equation
or tool similar to Ultracad to calculate this inductance value?

Thanks in advance

Brad



------------------------------------------------------
Brad Herrin 
Intel Corporation, TEG/EID     
2802 Kelvin Avenue 
Irvine, CA 92614-5826      
Phone: 949.567.4582                              
Fax:     949.567.4510       '88' 535i  (5 Speed/Stroked-4.0L)
Email: bradley.t.herrin@xxxxxxxxx       (Wk)                       
Email: bherrin1@xxxxxxx         (Hm)                       
------------------------------------------------------
 



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: