Hello Naveen! You can contact any reputable assembly shop that is well versed with SMT...it will definitely need an expert solderer but it is possible. Let me know if you need any additional support. Regards, Deac Descoteaux KAW/USA 39 Simon Street Unit#4 Nashua, NH 03060 telephone: (603) 886-8711 ext. 202 fax: (603) 881-8763 cell: (603) 557-7568 Deac Descoteaux ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu