[SI-LIST] Manipulation of ICM and/or ICEM model in EDA tool
- From: "Sogo Hsu" <sogo.hsu@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 27 Jul 2004 00:19:05 -0000
Hi, SI Gurus,
Though ICM and/or ICEM format has released for a while, as I get the
information from local FAE, there is still no proper tool, such as
Hspice, PCB SI (former SPECCTRAQuest) etc., can manipulate the model
very well. I truly appreciate that any expert here can give me some
points to achieve the simulation consists of IBIS and ICM file.
Thank you in advance.
Sogo Hsu, Ph. D.
Foxconn
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] Manipulation of ICM and/or ICEM model in EDA tool
