Not perfectly SI-related but I figured there are enough PCB manufacturing experts around on this list to warrant a question: What are good materials for low-leakage, high-voltage (2-10kV) applications? The standard solution here has been to use Rogers material (not for SI - the application is very slow speed, a few MHz at best - but purely for leakage reasons), but of course this is an expensive approach. Can anybody recommend a less pricey material that nevertheless offers very low leakage and doesn't have issues with moisture absorption (like FR-4 has)? The boards are multi-layer (typically 6-10 layers). Thanks in advance, Wolfgang ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu