It depends on whether sigtop and sigbot are planes or not. If they are both planes then it is an offset stripline. Steve. Lakshmi N. Sundararajan - PTU wrote: > Hi Team, > > Between these two stackup, > a) SIGTOP-PP(5 mils)-SIGINNER1-PP(22 mils)-SIGBOT > b) SIGTOP-PP(22 mils)-SIGINNER2-PP(5 mils)-SIGBOT > > While computing the impedance of the SIGINNER* layer, > it is offset stripline or edge coupled offset stripline. > > Would the impedance be different between these two cases? > I ask this because, when board (a) is rotated it becomes > board (b) and hence I do not expect impedance to vary between > these two stackups. > > Can anyone please confirm/clarify on this. > > Thanks, > -LN > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > -- Steve Weir Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 California office (866) 675-4630 Business (707) 780-1951 Fax Main office (401) 284-1827 Business (401) 284-1840 Fax Oregon office (503) 430-1065 Business (503) 430-1285 Fax http://www.teraspeed.com This e-mail contains proprietary and confidential intellectual property of Teraspeed Consulting Group LLC ------------------------------------------------------------------------------------------------------ Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu