Padma You may want to consider adding a test connector to your design and put it right onto the circuit board. Lets find a connector that works with your probe and simply add it. It makes for ease of testing in the future. Richard Jungert > Date: Sun, 12 Jul 2009 21:52:44 -0700 > From: pgundala2001@xxxxxxxxx > Subject: [SI-LIST] Impact of Probe -TDR Measurement > To: si-list@xxxxxxxxxxxxx > > Hi , > > I'm making Characteristic Impedance measurements using TDR , of a connector > soldered to a test fixture. I'm using a Single ended probe . I find that at > the point of contact of probe on the pad, there is a inductive impedance > approx. 78-82 ohms , Intially I thought I was measuring the impedance of the > connector, and then realised I was wrong. > I then tried to solder a co-ax cable to the pad . It is still shows a high > inductive impedance depending on the amount of solder at the joint. > > Has anyone come across this? Do I need to look into the details of the probe > rating , bandwidth? > > Thanks > > Padma > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > _________________________________________________________________ Lauren found her dream laptop. Find the PC that?s right for you. http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu