I think the answer is, "it depends." If you change Model_type from OUTPUT to I/O, you would have a tri-stateable buffer. You would need to add Vinh and Vinl values too. But if the model didn't have [Gnd Clamp] and [Power Clamp] sections already, you wouldn't be able to correctly mimic the buffer in the high impedance state. Andy > ---------- > The IBIS File contain only the data for the activ OUTPUT. > Is the model for the Tri_State a subset of the activ output ? > If yes, how can I generate it ? > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu