[SI-LIST] Hyperlynx - Assigning Pins from ibis
- From: Hithesh <hitheshn@xxxxxxxxx>
- To: SI-List <si-list@xxxxxxxxxxxxx>
- Date: Wed, 29 Oct 2014 15:01:34 +0530
I need some help with a particular IBIS model.
When I try to assign a Pin, I get the following message in Hyperlynx
"Series type models in file. C:\path may not be assigned interactively. Use
.Ref file model assignment instead"
The part is a demux IDT74CBTLV3257
Regards
-Hithesh
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
