Pay Chee How, 1. Search the help text for .SLM and it will tell you how to create your own Single Line connector Models. It will also tell you about other ways to model a connector as a transmission line. The on-line manuals found under menu item Help/Manuals, include the .SLM file specification. 2. The normal simulation stimulus, controlled from the oscilloscope, consists of rising or falling edge or oscillate with variable duty cycle control. If you are running eye diagrams, you have access to a number of standard bit patterns, or you can generate your own custom bit pattern. Best Regards, Max Pillie CAE, Mentor Graphics Technical Support for HyperLynx Redmond, WA max_pillie@xxxxxxxxxx The only 5 STAR support in EDA -Find out why at:www.mentor.com/supportnet 1-800-547-4303 -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Pay Chee How Sent: Thursday, September 02, 2004 3:16 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Hyperlynx Hi, 1. I am currently trying to run a simulation using a software called Hyperlynx 7.2 . I need to build a model for pogo pin and how can I create a file(in .slm format) if I already have all the specifications of the pogo pin...Is there any guide to write this file(.slm format)? 2. Is there anyway that i can set a tester(driver) in Hyperlynx to a particular set of pattern(say 0110) and observe the result at the moment the driver finshes driving? ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu