Hi, Motorola recommends following: "CLKIN Jitter and Duty Cycle The CLKIN input to the MPC8280 should not exceed +/- 150 psec. This represents total input jitter-the combination of short term (peak-to-peak)and long term (cumulative). The duty cycle of CLKIN should not exceedthe ratio of 40:60." We intend to use a Spread Spectrum Oscillator and want to make sure we don't violate Motorola's recommendation. While selecting Spread Spectrum Osc what specification I should be looking for to meet Motorola's recommendations ? Thanks, shiraz bashir ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu