SI folks, This is a question I am passing on from a circuit designer who is doing noise analysis in HSpice (2001.1). The subject is a DC circuit using "bsim3v3 noise model parameters". The objective as I understand it is to determine the amount and spectrum of random noise. Also, identifying which devices are contributing most to the noise would be a really good thing to know. I'm told the HSpice documentation for this feature is a bit thin. It looks for a defined output and input, then gives a noise spectrun at the output and an input-referred noise spectrum. This circuit doesn't really have an input, however, and all the designer wants is the noise spectrum at a given node. Any advice would be appreciated. While this question may not be quite the standard "PCB reflections" type of query, I trust folks will agree it is certainly of a signal integrity nature. Thanks in advance. Mike -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Mike Jenkins Phone: 408.433.7901 _____ LSI Logic Corp, ms/G715 Fax: 408.433.7495 LSI|LOGIC| (R) 1525 McCarthy Blvd. mailto:Jenkins@xxxxxxxx | | Milpitas, CA 95035 http://www.lsilogic.com |_____| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu