[SI-LIST] HSTL technology
- From: "Fabrizio Zanella" <fabrizioz@xxxxxxxxxxxx>
- To: "SI List" <si-list@xxxxxxxxxxxxx>
- Date: Fri, 22 Nov 2002 15:26:34 -0500
I'm using HSTL 1.5V technology to drive some FPGAs, on 50 ohm stripline,
with lengths between source and loads ranging from 3 to 18". What is
the optimum end termination value for 1.5V HSTL technology? And how
many loads can be driven using this technology?
Thanks,
Fabrizio Zanella
Signal Integrity Engineer
Broadbus Technologies
fabrizioz@xxxxxxxxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] HSTL technology
