I am dealing with DC ! so, some of my questions are not for the entire High speed audience, so I apologize I have a 4 gig ohm electrode/electrodes(s) ..... my electrode spacing is 0.230" and my socket has a 0.175" diameter / 4 layer I haven't seen much lit on the subject - PCB material / voids / components / etch width to the 1 resistor into the opAmp / given 0.060" / slots req'd what does conformal coating do for me.... comments, pointers to white papers, etc are welcome. Keith Kowal www.product-designs.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu