Can anyone recommend one or more good (thorough) references regarding gold plating on printer circuit boards. I'm looking for information like how to choose electroless verses electroplated, when nickel underplate is required, typical plating thicknesses, when selective pattern plating is possible, etc. Thanks! Regards, Jonathan Fasig ------------------------------------------------------------------------ Jonathan Fasig Email: fasig.jonathan@xxxxxxxx Mayo Foundation 4001 41st Street NW MSC Sn 2-132 Phone: (507) 538-5464 Rochester, MN 55901 Fax: (507) 284-9171 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu