Hi, Lynne Thanks a lot for your efforts. it help me a lot. Regards. Tesla At 2012-08-30 01:39:26,"Lynne C. Green" <lgreen22@xxxxxxxxxxxxxx> wrote: >Hello, Tesla, > >THICK film resistors are much thicker than THIN film resistors. Usually, >there is only one thickness of each on a substrate. Thick film can be >made with a screen-print process (material added to substrate), while >thin film is done with a coating that is then etched (material removed >from substrate). > >Resistance is controlled by resistor length, width AND thickness. Also >layout (corners). For both thin and thick films, materials and >thickness are already optimized, so a design engineer controls >resistance by layout. > >Hope this helps with your questions. > >Regards, >Lynne > > >"IBIS training when you need it, where you need it." > >Dr. Lynne Green >Green Streak Programs >http://www.greenstreakprograms.com >425-788-0412 >lgreen22@xxxxxxxxxxxxxx > > >On 8/29/2012 4:13 AM, Tesla wrote: >> Hi, All >> >> When searching documents about the SMD resistor, a question was raised by >> myself. For the thick film and thin film resistor in the same package,eg >> 0603, how do we control the value of the resistor? >> 1:thickness of the film >> 2:Keep the thickness same, make a lot of different shapes to the film. >> >> Thanks. >> Tesla >> > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > >List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > >List archives are viewable at: > //www.freelists.org/archives/si-list > >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu