[SI-LIST] Re: File Extension .fig
- From: "Ray Anderson" <ray.anderson@xxxxxxxxxx>
- To: <janton@xxxxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Fri, 3 Feb 2006 14:17:33 -0800
Jim-
Check at http://www.its.qut.edu.au/hpc/qpsf/mfigv/downloads.jsp
They have a free-to-use Matlab .fig viewer called mfigv that utilizes
the Matlab runtime libraries (which are downloadable vi a link from
their site).
I haven't tried it, but I looks like it should do the job.
-Ray
Xilinx Inc.
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Jim Antonellis
Sent: Friday, February 03, 2006 2:06 PM
To: Si-List
Subject: [SI-LIST] File Extension .fig=20
I rcvd some s-parameter figures that I believe may have been=20
generated under MATLAB given the little bit of header info I
could decipher from the file:
"MATLAB 5.0 MAT-file, Platform: PCWIN, Created on:"
I have been web searching for a "viewer" and have found some leads=20
but was wondering if anyone may have some tips on viewing these
figures outside of MATLAB as I do not own MATLAB.
The MATLAB website offers functions to do conversion, but I
believe they are called from MATLAB....
Thx,
Jim
-
Jim Antonellis janton@xxxxxxxxxxxxx
Sandburst Corp www.sandburst.com
Office: 978.689.1669=20
Cell: 978.618.4745
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
