Raymond Anderson wrote: >I wonder if anyone might have an example input file they could share for >describing a microstrip (or stripline ) geometry in the FlexPDE program >syntax? ......... > I managed to find an input file that set up part of the problem in some obscure documentation and then I was able to open the imptutor.pdf file on my system at home (don't know yet if my Acrobat reader at work is the problem or the download through the firewall) The tutorial file had the second part of the solution. In any event I managed to get the results I was looking for by merging bits and pieces of both examples together. Once I clean up the code and verify the accuracy I'll post it on the si-list.org web site in case anyone else wants to play with it. -Ray ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu