[SI-LIST] Does Hspice can do post-simulation on PCB level?
- From: kevin <heatsink@xxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 7 Aug 2003 17:25:57 +0800 (CST)
Hi Gurus:
Anyone have the post-sim experience by hspice?
how do you model via ?
how to model trace geometry or just use w-element is enough?
Does anyone do a comparison between simulation by SpecctraQuest using ibis
and simulation by Hspice using spice model?(simulate PCI-express's signal)
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
