Hi All, I have been writing again and this month's Technical Tidbit even includes a short Flash video. Problems with an ESD simulator can cause your product to fail even if it should have passed. ESD simulator waveforms should be checked at the beginning of every test day, this is especially true for units where you do not know the service history, such as a rented unit. Technical Tidbit - March 2011 Using High Frequency Measurement of ESD Current to Find Problems with an ESD Simulator Abstract: ESD Simulators, as with all equipment, can exhibit degraded performance. A short video is presented of sequential measurements of the contact discharge current of an ESD simulator that shows unacceptable variation from one discharge to the next. Possible causes are discussed for the example presented and recommendations are made. The link to the article is: http://emcesd.com/tt2011/tt030211.htm However there are now over 160 articles and papers on the site linked at: http://emcesd.com . Several of the recent articles are on ESD testing. Doug -- ------------------------------------------------------- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: doug@xxxxxxxxxx \ _ / ] \ _ / Website: http://www.dsmith.org ------------------------------------------------------- ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu