Could not you account this ferrite bead into the VRM model? Peng Shao 在 2013-3-21,14:24,"Balaji G" <bala89si@xxxxxxxxx> 写道: > Hi all, > We have analog and digital rails on our board. In case of Digital rails, > we assign the VRM as source and provide the Lslew, Rflat, L0, R0 values to > it and we get the PDN frequency response. In case of Analog rails where we > have a ferrite between the source and load, VRM will not be present if an > Analog net is selected. Should I consider the ferrite as source and check > for decoupling? Is it a correct way of checking decoupling for analog > rails? I believe most of the tools available doesn't consider the ferrite > bead in decoupling analysis eventhough its assigned with a model. I will be > happy to implement, if there is a suggestion. > > Regards, > Balaji > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu