[SI-LIST] Data Bus termination
- From: <mahesh.linge@xxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 29 Jun 2005 13:01:40 +0530
Hi,
I have Processor Flash and SDRAM on my board.My data bus is running at
125 MHz.I would like to know placement of the series termination
resistors on the data bus as it will be a bisectional.
Thanks in advance.
Regards,
Mahesh
Confidentiality Notice=0D
The information contained in this electronic message and any attachments to=
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or=
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or=
Mailadmin@xxxxxxxxx immediately
and destroy all copies of this message and any attachments.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
