Dear Sir, My PCB supplier doesn't test control impedance on actual board. They said control impedance is measured on test coupon. Please advice if it is realistic and reliable to use the test coupon measured impedance? Is this an industry norm, or standard? Thank you. Best regards, Liao Bo ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu