Yes, absolutely. The topics listed below are just a small cross-section.
Mike
-----Original Message-----
From: Cosmin Iorga [mailto:ci42775@xxxxxxxxx]
Sent: Wednesday, February 01, 2017 3:29 PM
To: si-list@xxxxxxxxxxxxx; mbuetow@xxxxxxxxxxxxxxxx
Subject: Re: [SI-LIST] Re: Call for abstracts on SI/PI for PCB West in
September
Hi Mike,
I haven't seen a Power Integrity section in the PCB West list of topics; is
power integrity included in any of the listed topics? I have submitted a
proposal hands-on workshop on power integrity.
Best Regards,
Cosmin
--------------------------------------------
On Tue, 1/31/17, Mike Buetow <mbuetow@xxxxxxxxxxxxxxxx> wrote:
Subject: [SI-LIST] Re: Call for abstracts on SI/PI for PCB West in
September
To: si-list@xxxxxxxxxxxxx
Date: Tuesday, January 31, 2017, 7:26 AM
It was brought to my attention that I
gave a bad link yesterday. Many
apologies!
This one should work: http://pcbwest.com/submit-an-abstract
-----Original Message-----
From: Mike Buetow [mailto:mbuetow@xxxxxxxxxxxxxxxx]
Sent: Monday, January 30, 2017 11:35 AM
To: 'si-list@xxxxxxxxxxxxx'
Subject: Call for abstracts on SI/PI for PCB West in September
Folks,
PCD&F and UP Media Group are seeking abstracts for PCB West 2017, to be
held September 12 - 14, 2017, in Santa Clara, CA. The event includes a
three-day technical conference and one-day exhibition to be held at the
Santa Clara (CA) Convention Center. PCB West is the largest event for
design and manufacturing of PCBs, HDI, electronics assembly and circuit
board test in the Silicon Valley. The September 2016 event attracted
nearly 2,000 attendees.
Papers and presentations of the following durations are sought for the
technical conference: one-hour lectures and presentations; two-hour
workshops; and half-day (3.5 hour) and full-day seminars.
Some suggested
paper and presentation topics include:
. RF and microwave design
. LED design and assembly
. High-speed, high-frequency design
. Signal integrity
. Noise control
. Flex circuit design
. EMI/EMC analysis
. Thermal analysis and management
Papers and presentations must be noncommercial in nature and should focus
on technology, techniques or methodology.
Abstracts of 100 to 300 words and speaker biographies should be submitted
to UP Media Group at
http://pcbwest.com/index.php/conference/submit-abstract-2017..
Anyone may submit an abstract to present a course at PCB West 2017, and
presenters may present more than one paper or teach more than one course.
A separate abstract must be submitted for each course.
If selected, a detailed presentation outline and final paper or
presentation is due July 24, 2017. PRINTED CIRCUIT DESIGN & FAB and
CIRCUITS ASSEMBLY magazines are media partners for the event.
Thanks! We look forward to seeing you at the show!
Best,
Mike
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx
with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
