[SI-LIST] CPU-Memory Simulation
- From: Mohammad Haeri Kermani <mkhaeri@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 3 Aug 2007 14:14:43 -0400 (EDT)
Hi All,
I am simulating a CPU-Memory system (the CPU is connected to 2 DIMMs)
using IBIS models. The CPU (buffer setting: input) is reading from one
DIMM (buffer setting: output). Which setting should I use for the other
DIMM? Should I use "input" buffer setting for the other DIMM or should I
use high impedance (open) in the simulation? (these two cases give
different results).
Thanks,
M. Kermani
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
