[SI-LIST] Re: Bandwidth & AC coupling capacitor

  • From: steve weir <weirsi@xxxxxxxxxx>
  • To: Richard Jungert <r_jungert@xxxxxxxxxxx>
  • Date: Sun, 31 May 2009 14:44:14 -0700

Richard, if one goes about selecting the capacitor correctly the 
inductance from part to part between manufacturers and as manufacturers 
change their own process will vary by only a couple percent.  Choose the 
capacitor properly, and design the etch properly and the job is done.  
The design and component sourcing will not have to be revisited next 
month or next year.

Best Regards,


Steve.

Richard Jungert wrote:
> Steve
>
> The inductance your talking about it way above the SRF. Is this 
> inductance value going to work each time for any capacitor ( with the 
> same value ) that is stuffed in there? What if  we change capacitor 
> manufacturers and the process for making them is slightly different 
> and so the inductance  your talking about is different?  This kind of 
> problem one also needs to also consider if your going to manufacture 
> the product.  Maybe in this case one would need to pick one 
> manufacturer/process for this specific part function.
>
> Richard Jungert
>
>
>
> > Date: Sun, 31 May 2009 13:23:24 -0700
> > From: weirsi@xxxxxxxxxx
> > To: r_jungert@xxxxxxxxxxx
> > Subject: Re: [SI-LIST] Re: Bandwidth & AC coupling capacitor
> >
> > Richard from a circuit standpoint it is somewhat simpler than a typical
> > line equalization problem such as long video transmission lines. So
> > long as the capacitor is selected such that the mounted SRF is well
> > below any signal frequencies, the dominant reactance is entirely
> > inductive. This is readily compensated with a pure capacitance which is
> > readily manipulated through the pad and ground clear out patterns. The
> > compensation works provided that the structure is small compared to the
> > shortest wavelength of interest.
> >
> > Best Regards,
> >
> >
> > Steve.
> > Richard Jungert wrote:
> > > I would suggest finding out where the losses are or where the first
> > > pole occurs and then building a LC compensation network to address 
> the
> > > problem with rolloff. Peak it where the rolloff occurs. Use
> > > compensation and equalization circuits to fix it.
> > >
> > > This is how it has been done in other technologies such as analog
> > > video for years.
> > > Its an age old problem.
> > >
> > > Richard Jungert
> > >
> > > > Date: Sun, 31 May 2009 03:34:29 -0700
> > > > From: weirsi@xxxxxxxxxx
> > > > To: icermail@xxxxxxxxx
> > > > CC: si-list@xxxxxxxxxxxxx
> > > > Subject: [SI-LIST] Re: Bandwidth & AC coupling capacitor
> > > >
> > > > It is all about the series impedance and impedance continuity. 
> Your PCB
> > > > etch is nominally a 50 Ohm signal transmission line. From about an
> > > > octave above the mounted SRF, the capacitor looks like an 
> inductor with
> > > > some loss. If the interconnect in the region of the capacitor is
> > > > arranged such that the parasitic shunt capacitance Cshunt =
> > > Lcap_mounted
> > > > / 2500, then for wavelengths that are long compared to the 
> length of
> > > the
> > > > region surrounding the capacitor, the L/C approximates the 
> impedance of
> > > > the rest of the transmission line and there is little impedance
> > > > discontinuity.
> > > >
> > > > Steve.
> > > >
> > > >
> > > > icer world wrote:
> > > > > When use AC coupling for interconnection,the capacitor is about
> > > 0.1-0.01uF.However,the resonance frequency of this kind capacitor is
> > > below 100MHz,Would signals above 1GHz such as PCIe signals can 
> pass it
> > > without no bandwidth reduced?Can anyone give me a explanation? Thanks!
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------------------------------------------
> > > > > To unsubscribe from si-list:
> > > > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the 
> Subject field
> > > > >
> > > > > or to administer your membership from a web page, go to:
> > > > > //www.freelists.org/webpage/si-list
> > > > >
> > > > > For help:
> > > > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> > > > >
> > > > >
> > > > > List technical documents are available at:
> > > > > http://www.si-list.net
> > > > >
> > > > > List archives are viewable at:
> > > > > //www.freelists.org/archives/si-list
> > > > > or at our remote archives:
> > > > > http://groups.yahoo.com/group/si-list/messages
> > > > > Old (prior to June 6, 2001) list archives are viewable at:
> > > > > http://www.qsl.net/wb6tpu
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > Steve Weir
> > > > Teraspeed Consulting Group LLC
> > > > 121 North River Drive
> > > > Narragansett, RI 02882
> > > >
> > > > California office
> > > > (866) 675-4630 Business
> > > > (707) 780-1951 Fax
> > > >
> > > > Main office
> > > > (401) 284-1827 Business
> > > > (401) 284-1840 Fax
> > > >
> > > > Oregon office
> > > > (503) 430-1065 Business
> > > > (503) 430-1285 Fax
> > > >
> > > > http://www.teraspeed.com
> > > > This e-mail contains proprietary and confidential intellectual
> > > property of Teraspeed Consulting Group LLC
> > > >
> > > 
> ------------------------------------------------------------------------------------------------------
> > > > Teraspeed(R) is the registered service mark of Teraspeed Consulting
> > > Group LLC
> > > >
> > > > ------------------------------------------------------------------
> > > > To unsubscribe from si-list:
> > > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject 
> field
> > > >
> > > > or to administer your membership from a web page, go to:
> > > > //www.freelists.org/webpage/si-list
> > > >
> > > > For help:
> > > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> > > >
> > > >
> > > > List technical documents are available at:
> > > > http://www.si-list.net
> > > >
> > > > List archives are viewable at:
> > > > //www.freelists.org/archives/si-list
> > > > or at our remote archives:
> > > > http://groups.yahoo.com/group/si-list/messages
> > > > Old (prior to June 6, 2001) list archives are viewable at:
> > > > http://www.qsl.net/wb6tpu
> > > >
> > > >
> > >
> > > 
> ------------------------------------------------------------------------
> > > Hotmail® has ever-growing storage! Don’t worry about storage limits.
> > > Check it out.
> > > 
> <http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutorial_Storage1_052009>
> >
> >
> > --
> > Steve Weir
> > Teraspeed Consulting Group LLC
> > 121 North River Drive
> > Narragansett, RI 02882
> >
> > California office
> > (866) 675-4630 Business
> > (707) 780-1951 Fax
> >
> > Main office
> > (401) 284-1827 Business
> > (401) 284-1840 Fax
> >
> > Oregon office
> > (503) 430-1065 Business
> > (503) 430-1285 Fax
> >
> > http://www.teraspeed.com
> > This e-mail contains proprietary and confidential intellectual 
> property of Teraspeed Consulting Group LLC
> > 
> ------------------------------------------------------------------------------------------------------
> > Teraspeed(R) is the registered service mark of Teraspeed Consulting 
> Group LLC
> >
>
> ------------------------------------------------------------------------
> Insert movie times and more without leaving Hotmail®. See how. 
> <http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd1_052009>


-- 
Steve Weir
Teraspeed Consulting Group LLC 
121 North River Drive 
Narragansett, RI 02882 

California office
(866) 675-4630 Business
(707) 780-1951 Fax

Main office
(401) 284-1827 Business 
(401) 284-1840 Fax 

Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax

http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of 
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: